Why does "No Fix" for GPS Accuracy show on the Maps page when connected to an ESG/ESGi?

This issue may result from configuration or hardware problems. Use the following steps to troubleshoot:

Use the following steps to troubleshoot the problem:

Check GPS Settings: Check that "Use as GPS" is on. To do so,
- Connect to the Stratus WiFi.
- Open ForeFlight Mobile and navigate to More > Devices > Stratus.
- Ensure the "Use as GPS" switch is set to On.
Troubleshoot Hardware/Installation: If "No Fix" persists while the aircraft is on the ramp with a clear sky view, a hardware or installation error may be the cause. The Avionics shop/installer should inspect the cable, plugs, and pins to ensure proper wiring per Appareo installation instructions.
Common Wiring Issue: Symptoms like this may result from an incorrectly wired cable, particularly if pins 6 & 7 are reversed between the ESG/ESGi and the Stratus 2S/S.
Technical Support: If issues persist, the Avionics shop or installer should contact Appareo technical support for further assistance.