In Military Flight Bag (MFB), Bullseye can be set by tapping on the map, tapping on a map element (Waypoint, VOR, Airport, Etc.), or from a waypoint in the flight plan viewer. To set Bullseye, the feature must first be turned on. To enable Bullseye, go to More > Settings. Under the Military Flight Bag section, turn the switch on next to Bullseye Features.
Bullseye enabled under More > Settings
Setting Bullseye by tapping on the map
To set Bullseye by tapping on the map, follow these steps:
STEP 1: Tap on the map where the Bullseye will be placed. A slide-over will appear.
STEP 2: Next to the location coordinates, select More.
Select More
STEP 3: Select Set as Bullseye.
Select Set as Bullseye
Setting Bullseye by tapping on a map element
STEP 1: Tap on a map element (Waypoint, VOR, Airport, Etc.) where the Bullseye will be placed. A slide-over will appear.
STEP 2: From the slide-over, select More >.
Select More >
STEP 3: Select Set as Bullseye.
Select Set as Bullseye
Setting Bullseye by tapping on a waypoint in the flight plan viewer
STEP 1: Tap on the FPL button. The flight plan viewer will open.
Open the flight plan viewer by tapping FPL
STEP 2: Select either the Edit or NavLog button in the lower right corner of the flight plan viewer.
Select the Edit or NavLog button
STEP 3: Tap on the waypoint to set as Bullseye. A slide-over will appear.
Tap on a waypoint to set as Bullseye
STEP 4: From the slide-over, select More >.
Select More >
STEP 5: Select Set as Bullseye.
Select Set as Bullseye
Last Updated: