SUPPORT CENTER

In Military Flight Bag (MFB), Bullseye can be set by tapping on the map, selecting a map element (e.g., Waypoint, VOR, or Airport), or using a waypoint from the flight plan viewer. Follow the steps below to enable and set Bullseye.

Enable Bullseye Features

Before setting Bullseye, ensure the feature is turned on:

1. Open More > Settings.
2. Scroll to the Military Flight Bag section.
3. Turn the switch On next to Bullseye Features.

Setting Bullseye by Tapping on the Map

To set Bullseye by tapping on the map, follow these steps:

1. Tap on the desired location for a Bullseye on the map. A slide-over will appear.

2. Tap More next to the location coordinates.

3. Select More > from the list of options that appeared.

4. Select Set as Bullseye.

Setting Bullseye by Tapping on a Map Element

To set Bullseye by tapping on a map element, follow these steps:

1. Tap on a map element (e.g., Waypoint, VOR, or Airport). A slide-over will appear.

2. From the slide-over, tap More >.

3. Select Set as Bullseye.

Setting Bullseye via the Flight Plan Viewer

To set Bullseye from within the Flight Plan Viewer, follow these steps:

1. Tap the FPL button to open the Flight Plan Viewer.

2. Enter a route that includes a waypoint that will be set as a Bullseye.

3. Tap either the Edit or NavLog button in the lower-right corner of the viewer.

4. Tap the desired waypoint to set as a Bullseye. A slide-over will appear.

5. Tap More > from the slide-over.

6. Select Set as Bullseye.